HYDRO-PRO HEAT PUMPS
Heat pumps use free thermal energy of the environment and solar energy. Then this energy is transferred to the pool water. The installed pool pump carries water through the heat pump exchanger and heats the pool. The unit contains a fan that draws air from outside and directs it over the surface of the EVAPORATOR (energy collector). The liquid refrigerant in the EVAPORATOR coil absorbs heat from the air, and then the coolant evaporates. The hot gas passes through the compressor, where it is compressed until a very hot gas is formed, which then passes through a condenser (water heat exchanger). This is where the heat exchange takes place - the warm gas gives off the cooler water in the pool by circulating through the exchanger. The swimming pool water becomes warmer and the hot gas cools, flows through the condenser exchanger, returns to the liquid form and after expending the expansion valve, the whole process starts again.
INSTRUCTION
Features:
- High efficiency, COP indicator up to 5.5
- "For all seasons", works at temperatures up to -5 ° C
- Temperature control on the LCD display
- Model with a flow sensor
- All functions controlled by a microprocessor
- Silent operation of a rotary compressor, fan
- Automatic defrosting
- Titanium heat-shroud resistant to salt and chlorine;
|
TYP
|
HEATING POWER
A27/W27 |
ENGINE POWER
|
COP
A27/W27 |
MAX. POOL VOLUME
|
FLOW
|
|
5
|
5 kW
|
0,93 kW
|
5,8
|
20 m3
|
2,5 m3/h
|
|
7
|
7 kW
|
1,02 kW
|
5,9
|
30 m3
|
2,5 m3/h
|
|
10
|
10 kW
|
1,48 kW
|
6,2
|
45 m3
|
2,8 m3/h
|
|
13
|
13 kW
|
1,86 kW
|
6,0
|
60 m3
|
3,5 m3/h
|
|
18
|
18 kW
|
2,51 kW
|
6,1
|
85 m3
|
4,6 m3/h
|
|
22
|
22 kW
|
3,45 kW
|
5,9
|
120 m3
|
6,2 m3/h
|
Features:
- Energy label: C,
- high COP efficiency up to 6.2
- 'All seasons' model, from -5 ° c,
- easy through-going temperature control via the LCD display,
- all functions controlled by a microprocessor,
- quiet operation at low sound of the fan rotary compressor, low noise level,
- R410 gas environment-friendly automatic defrosting,
- titanium heat exchanger for salt and chlorine,
- in the flow sensor, drain plug and vibration damper,
- winter cover included,
- maximum water volume depending on the average outdoor temperature;
|
TYP
|
HEATING POWER
A27/W27 |
ENGINE POWER
|
COP
A27/W27 |
MAX. POOL VOLUME
|
FLOW
|
|
5
|
5,0 kW
|
0,93 kW
|
5,8
|
20 m3
|
2,5 m3/h
|
|
7
|
7,0 kW
|
1,02 kW
|
5,9
|
30 m3
|
2,5 m3/h
|
|
10
|
10,0 kW
|
1,48 kW
|
6,2
|
45 m3
|
2,8 m3/h
|
|
13
|
13,0 kW
|
1,86 kW
|
6,0
|
60 m3
|
3,5 m3/h
|
|
18
|
18,0 kW
|
2,51 kW
|
6,1
|
85 m3
|
4,6 m3/h
|
|
22
|
22,0 kW
|
3,45 kW
|
5,9
|
120 m3/h
|
6,2 m3/h
|
